Our Range

All of our products are designed primarily for the trans community, to help with body struggles 'below the waist'. The Kitty range is designed for trans women, to minimise the appearance of male genitalia and provide a more feminine look, whereas the Puppy range is designed for trans men, to visibily hide and also remove access to female genitalia.

Things that all of our Kitty and Puppy products have in common are that they are all designed and produced in Sweden, personally by Emma. The majority use state of the art medical grade bioresin and all are worn by us on a daily basis, which means we intimately understand just how our products are meant to be worn and what they are meant to do.

Did you know that most resin products use the same resin found in auto body repair? Using bioresin however, means that our products are non-cytotoxic, non-sensitizing and non-irritating, which is essential for long term wear. The products printed in bioresin are printed at a detail level of 0.05mm, to ensure a smooth and body friendly finish. This means there is no need to sand them down before use.

Some of our range (the Kitty Clip Standard v2 lite, Standard v1 Air, v3 Air and the Kitty Separator Emma's Heart) are produced in crystal clear or pink ABS plastic using injection moulding. These products offer the same benefits as the ones in bioresin, but also offer an improved flexibility in their construction and the crystal clear products are almost invisible to the eye when worn.

Kitty Clip
Our Kitty Clips currently come in two sizes; Mini and Standard, and several options; v1, v2, v3, v4, v5, lite and also the Air models, along with the Valkyrie. The Kitty Clip range is designed for trans women. All of the Kitty Clip models (except the v4 and v5) can be used with our Kitty Funnels, to allow the wearer to visit the bathroom without removal.

Kitty Clip Mini
The Mini uses a single ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The Mini is meant for those with not so much free skin and small to average sized genitals. The Mini blends in to the surrounding area and gives a natural 'mound' appearance. The Mini comes in 2 options; v1 Air and v2 lite.

v1 Air and v2 lite
The only difference between the v1 Air and v2 lite, is that the v1 Air is not meant for straps, whereas the v2 lite has hoops specifically designed to support a 2 or 3 way strap for extra security. The v1 Air is aimed at the more advanced and relaxed wearer, the v2 lite is perfect for anyone getting used to tucking and wearing clips and if you're more active (in or out of the bedroom). 

Kitty Clip Standard
The latest version of the original standard size Kitty Clip, which uses a second larger ring, outside the Mini ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The standard is meant for those with more free skin and average to slightly above average sized genitals. The free skin is folded under the outer ring and gives a lower profile, 'spread' appearance. The Standard Lite is moulded in ABS plastic. The Standard comes in two options; v1 Air and v2 lite.

Standard v1 Air and v2 lite
The only difference between the v1 Air and v2 lite, much like the Mini versions, is that the v2 Air is not meant for straps, whereas the v2 lite has hoops specifically designed to support a 2 or 3 way strap for extra security. Both models can be worn by anyone from beginner to advanced wearer, the v2 lite is aimed more at the active wearer (in or out of the bedroom).

Kitty Clip v3
The v3 is a hybrid between the Mini and Standard clip.It uses a single ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The v3 is meant for those with little to average free skin and small to average sized genitals. The central bar divides the skin vertically, which gives the most feminine appearance of any tucking clip available today, mimicking the female labia and clitoral hood. 

It has an integrated adaptor for the Kitty Funnel, to allow the wearer to use the bathroom without removing the clip (it can also be worn without a funnel). The v3 Air comes with a specially designed, extra short version of the Kitty Funnel, whereas the v3 lite is designed to use the short Kitty Funnel (sold separately). The v3 comes in 2 options; v3 lite, and the v3 Air.

v3 lite and v3 Air
The main difference between the v3 lite and v3 Air, is that the lite has hoops specifically designed to support a 2 or 3 way strap for extra security, whereas the v3 Air does not support straps and therefore gives the ultimate feminine appearance. The v3 lite is designed for anyone getting used to tucking and wearing clips, but with its lack of strap hoops, the v3 Air is definitely for the more advanced wearer.

Kitty Clip v4
The v4 is a uniquely shaped product that doesn't rely on rings to tuck the genitals, and is therefore extremely comfortable to wear and easy to use. It uses a flowing design that incorporates a 'clit' holder that inverts and holds the penis in position, while three bars separate the testicles and hold them inside the body while also providing the appearance of labia. It provides a very low profile appearance that mimicks the female labia and clitoris.

The v4 requies 3 way straps and the clit holder is angled to allow the wearer to use the bathroom without removing the clip, as such it is not designed to work with the Kitty Funnel range. Being larger in size (slightly larger than a Fufu Grande), it can be worn by anyone with little to above average free skin and small to average sized genitals. It can also be used by anyone, from beginner to advanced.

Kitty Clip v5
The v5 is a hybrid design that draws on elements of both the Puppy Clip v2 Air and the Kitty Clip v4. Much like the v4, the v5 is a uniquely shaped product that doesn't rely on rings to tuck the genitals, and is therefore extremely comfortable to wear and easy to use. It is narrower than the v4, using a single outer ring that incorporates a dome that slightly inverts and holds the penis in position, while a single bar separate the testicles and holds them inside the body while also providing the appearance of labia. It provides a very low profile appearance that resembles female labia and the clitoris.

The v5 comes with strap hoops and is designed to work with the 3 way strap (sold separately). The dome is angled to allow the wearer to use the bathroom without removing the clip, as such, it is not designed to work with the Kitty Funnel range. Just like the v4, the design of the clip makes stimulation via direct vibration a very pleasant experience, and is therefore a lot of fun to wear in the bedroom!

Kitty Clip Valkyrie
Coming soon!

Kitty Funnel
The Kitty Funnel is designed to be used in addition to the Kitty Clip, it allows the wearer to remain in their Kitty Clip while going to the bathroom. You position the Kitty Funnel as part of the normal process of fitting your Kitty Clip.

Although the Kitty Funnel was designed for the Kitty Clip range of products, it works with ALL other clip devices, such as the FuFu® clip.

Our Kitty Funnels currently come in four sizes; short (27mm), medium (32mm), long (37mm) and the v3.

The size you use depends entirely on how you wear your clip and how much skin you have, the medium length fits most people. The v3 is designed for and included with the Kitty Clip - v3 Air, Kitty Card Mini - v3, but can also be purchased for the Kitty Clip - v3 lite.

To measure yourself for the correct length, you need to insert a small, smooth object (such as a Sharpie) between the inner ring of your clip so that the tip of the object touches the tip of the penis. Place a finger tip on the object where the skin comes upto, remove the object and then measure from the tip of the object to your finger tip. You should add roughly 5mm to this number to ensure the funnel just clears the skin. If you are in between lengths, go for the next length up and if the measurement is longer than our extended size, please contact us using the 'Contact' page and we'll do our best to help.

Kitty Card
Our Kitty Cards currently comes in two sizes; Mini and Standard, with three options; v1, v2 and v3. The Kitty Cards can only be worn with the optional 3 way strap.

Each year we are committed to donating a portion of the profits raised from Kitty Card sales to trans focused charities, so buy yours and show your support!

Mini v1
The Mini v1 is similar in size to a bank card and is pre-shaped to follow the lines of the body. It is meant for those with smaller, less active genitals and less free skin and provides a minimal look, especially under tighter clothing.

Mini v2
The v2 shares the same dimensions as the Mini v1, but has an integrated Kitty Clip Mini opening that allows the wearer to fashion their skin as little or as much as they like depending on the effect they wish to go for.

Mini v3
The v3 shares the same dimensions as the restof the Mini range, but has an integrated adaptor for the Kitty Funnel, to allow the wearer to use the bathroom without removing the card (it can also be worn without a funnel). The v3 comes with a specially designed, extra short version of the Kitty Funnel, as sold with the v3 Air clip but you can also use other sizes of the funnel depending on personal preference and the amount of inversion you wish to achieve.

Standard v1
The standard size version of the Kitty Card is larger than the Mini versions and shapes to your body during use to provide an even cleaner aesthetic. It is meant for those with smaller to average sized genitals and free skin.

Kitty Separator
Our Kitty Separators are designed for trans women and use a single central bar to separate the scrotum skin and testicles to give the appearance of larger labia. Due to the unique design it is recommended for those with small testicles or those having undergone an orchiectomy to achieve the best result.

Our Separators currently come in two sizes (depending on which model) and three options; Emma's Heart, Eir and Idun. They are all designed to work with the 3 way strap (sold separately) and both Eir and Idun can also use the Kitty Wedge products (also sold separarately) to add inversion to the scrotum area, for both comfort and to help with tucking the testicles and excess skin.

Emma's Heart
The Emma's Heart version shares the integrated adaptor for the Kitty Funnel range with Eir, to allow the wearer to use the bathroom without removing the clip (it can also be worn without a funnel). It is longer than the other models, less curved and flatter in design, and incorporates a beautiful heart motif just above the funnel adaptor. 

The Emma's Heart version is only available in pink ABS plastic and fits most people with average and above skin and kitties. It comes with two funnels, an opaque version of the v3 funnel as used with the v3 Air and other products, along with a specially extended version of the v3 funnel, for those looking for increased inversion.

Eir (pronounced Air)
As with the Emma's Heart version, Eir uses the integrated adaptor for the Kitty Funnel range, to allow the wearer to use the bathroom without removing the clip (it can also be worn without a funnel). Eir is shorter in length, and has a simplified design to allow it to blend in better with the surrounding skin. 

Eir is only available in frosted clear bioresin and fits most people with less to average skin and kitties. It comes with the same v3 funnel as used with the Emma's Heart version.

Idun (pronounced Ee-dun)
Idun is the same length and basic design as Eir, however Idun uses a larger dome instead of a funnel to hold the penis in position and as such can't be used with the Kitty Funnel range. The dome has a vertical opening that lines up with the urethra to allow the wearer to use the bathroom, without removing the clip.

As with Eir, Idun is only available in frosted clear bioresin and fits most people with less to average skin and kitties.

Kitty Wedge
The Kitty Wedge is designed to work with our Kitty Separator range of products (sold separately). It adds additional inversion to the scrotum area, for both comfort and to help with tucking the testicles and excess skin.

The Wedge is currently available in three depths; shallow (15mm), standard (22mm) and deep (29mm), depending on the amount of inversion you require.

Puppy Clip
The Puppy Clip is specifically designed for trans men, but some models may be suitable for trans women depending on the size of genitals. The outer ring is designed to support a 3 ways strap (sold separately), but for those with piercings, the outer ring can be secured using them, for a more permanent and low profile finish. Our Puppy Clip currently comes in one size and several options; v1, v2, v2 Air, v3, v3 Air and th Alien.

v1
The v1 uses a single curved central plate to cover the genitals, removing access and reducing sensation. The plate is vented with a honeycomb design to allow the genitals to breathe and also allow the use of the bathroom.

v2 and v2 Air
The v2 is similar in design to the Puppy v1, but it incorporates an open hooded section to cover the clitoral area. The lower area has bars to completely remove access to the vagina. The open design allows use of the bathroom and the hood gives a small bulge in underwear.

As with other Air products, the v2 Air is a simplified version of the Puppy v2. It incorporates the same open hooded section to cover the clitoral area. The lower bars are removed which allows full access to the vagina. It is lighter, and more ergonomic, so it blends in to the surrounding area.

v3 and v3 Air
The v3 is similar in design to the Puppy v2, but it uses a large dome section section to cover the clitoral area. The lower area has a single vertical bar to reduce access to the vagina but allowing room for the labia to sit more freely. The design doesn't as easily allow use of the bathroom, but the dome gives a pleasing bulge in underwear.

As with other Air products, the v3 Air is a simplified version of the Puppy v3. It incorporates the same dome section to cover the clitoral area. The lower bar is removed though, which allows full access to the vagina. It is lighter, and more ergonomic, so it blends in to the surrounding area.

Alien
The Alien is a hybrid model, sharing some elements with the Puppy v1 and v3, but with a newly designed canopy section that resembles the head of the popular creature from a certain science fiction franchise. The canopy is designed to completely cover the clitoral area and allow no access. The canopy is vented with a honeycomb design to allow the genitals to breathe and also allow the use of the bathroom. It shares the same lower single vertical bar as the Puppy v3 to reduce access to the vagina but allowing room for the labia to sit more freely. The canopy gives a small bulge under underwear and is designed for those with small to average bottom growth.

Puppy Hood
The Puppy Hood is similar in design to that found on the Puppy Clip - v2 and v2 Air, but is meant for those with genital piercings to provide the ultimate, minimal and permanent finish. The open design allows use of the bathroom and also provides a small bulge in underwear. 

The Puppy Hood currently comes in two sizes; standard and large. Due to the potential unique layout of piercings, we offer a customisation service of the Hood (for an additional fee).

Product Customisation
Although our products are made to follow the lines of your body, we know that we're all different and just how important it is that your Kitty or Puppy product works for you.

With that in mind, we also offer a customisation option for all of our Kitty and Puppy range. This can be anything from a little personalisation and expression of your character, to a more bespoke fitting. 

Whatever the requirement, please contact us using the 'Contact' page and we'll do our best to help.

When you purchase a product from our site, you are given a QR code that provides access to useful guides with Emma on how to both fit and modify your Kitty and Puppy products.

This page is regularly being updated as new products are created, so please check back from time to time.